Is Your Drinking Water Safe – The Best Way To Remove Lead From Water


Did you know that you could be consuming lead with every sip of water that you drink? Though lead is a natural element, it can be toxic for your health. From water faucets and pipes to solders and other systems, lead is present all around you. So, how to remove lead from water?

These systems have been running for decades, with its makers unaware of the severe impact lead may have on your health. However, that does not mean you need to continue drinking contaminated water.

In this article, you will learn about the various ways through which you can drink lead-free water. That is not all. Along with how to remove lead from water, you will also learn about the best water filter for lead removal.

Impact of Lead On Your Health

Though lead consumption is not fatal, if you consume lead more than 0.01mg per liter, it may be injurious. That said, the negative impact of lead on health mainly implies to children.

Kids below the age of 7 years have weak immune systems, which is why their bodies are more vulnerable to lead exposure. Here are a few ways how lead can negatively impact you and your child’s health.

  • Permanent or partial brain damage
  • Loss of IQ
  • High BP
  • Toxic for kidneys

Apart from these, lead can prove to be highly dangerous for pregnant women. It can lead to premature birth, or worse, miscarriage. Therefore, you must be very precautious with your drinking water.

That said, you must know that lead is not present in all types of water. So, how to know if your water contains lead or not?

How to Know If Your Water Contains Lead

Even if it is present in high content, you cannot see lead in water. In fact, there is no way you can find it out yourself. The lead-testing kits available in stores too fail to measure the accurate lead content.

The only way you are left with is to get it checked with an official water provider. You may get in touch with your local government agency or a water-testing laboratory to conduct a lead test.

Getting your water tested becomes even more important if your community pipe system is an old one. Additionally, if your water delivery system has rusted from any section, its lead content will automatically be high.

Once the local authorities are sure about the lead water pipes, they will take the necessary action to change them. Meanwhile, you need to find out ways to protect yourself and your family from this contaminant.

Are you wondering how to remove lead from water? Does boiling water remove lead, or should you opt some other way? You need not worry. Much to your relief, there are multiple ways to do so. Here are a few different ways to remove lead from water.

Different Ways To Remove Lead From Well Water

  • Reverse Osmosis

It is a process wherein high-pressure water is made to pass through a thin membrane. In this way, the water solute is left on the membrane while clear water is received at the other end. Reverse osmosis is used in several filters and has proven to be beneficial for removing lead.

That said, you must know that this process may also remove fluoride, which is necessary for kids. The element helps children to fight against cavities. Thus, RO systems may not be the best option.

  • Distillation

One of the oldest processes of water purification, distillation is indeed the most effective one. The method involves boiling water until it completely evaporates, leaving only solutes behind. The vapor is then condensed to form droplets, which collect to give distilled water.

Though this process is effective in water filtration, it may also remove other essential elements of water. Needless to say, it is a highly time-taking and tedious task.

  • Activated Carbon Water Filter

Options like reverse osmosis and distillation may prove to be quite expensive. So, what’s the solution? Activated carbon water filters are cheap, reliable, and extremely effective. They can help to remove from 95% to 99% of lead from water.

Carbon filtering uses a carbon substrate that traps contaminants in its pores as water passes through. Thus, all the impurities, allergens, and viruses are removed, giving you clean and hygienic drinking water.

Doesn’t that sound amazing? That said, you must ensure that you choose a lead water filter. One such example is the Brita longlast filter. It is one of the best water filters that remove lead. Why so? Read on to know!

Why Choose Brita Longlast Filter?


Check the Price

The Brita longlast filter is a specially designed water filter for lead removal. It reduces 99% of contaminants, including lead, chlorine, mercury, benzene, and other such hard metals that may be harmful. Moreover, it is certified by WQA.

What’s more? Its pleated filter technology enhances its lifespan while the activated carbon reduces contaminants. Most importantly, its adsorbents present in the filter media aid in reducing lead content.

Here are a few more reasons why the Brita filter lead removal system is better than others.

  • It lasts for up to 6 months, unlike other filters that last for 1-3 months
  • Very easy to install in your pitcher or dispenser
  • Enhances the taste of drinking water
  • Reduces footprint by preventing you from using 900 bottles of 16 oz
  • Does not remove essential elements like fluoride from water

Most of all, it makes for the most reasonable way of removing lead from water. Once you buy this filter, you will neither have to change it for 6 months nor buy more water bottles.

How Can You Reduce Lead in Drinking Water?

Apart from the mentioned lead-removal methods, here are a few ways to reduce the content of lead in drinking water.

Flush the Water

If you do not find water filters cost-effective, flushing your pipe is a great option. If you do not use a pipe or faucet for 6 hours or more, let the water run. When water stays in the pipe for too long, the impurities like lead, etc., dissolve in the water.

If you turn on the tap and let it flow for a minute or two, your pipe will be flushed. In this way, the lead-contaminated water will flow out, leaving only fresh water. You can now use this water for drinking or cooking.

Note: To utilize water, you may use the flushed water for washing dishes and clothes or watering the plants.

Consume Cold Water Only

Believe it or not, hot water tends to have a higher content of lead than cold water. Therefore, do not use the hot tap of water for consumption, especially when it comes to babies. Instead, you may take cold water and then heat it if you prefer hot water.

Keep Your Water Faucet Clean

The most common way of the lead entering your house is through your water systems. While changing the entire water delivery system may be expensive and time taking, you can start with your faucet.

Remove your faucet once in 2-3 months and clean it thoroughly. It is an important step as particles coming from rusted solders and pipes may stick to your faucet.

Watch What You buy

When you think of purchasing a new fixture or any other fitting, make sure it contains the minimum amount of lead. The lead content in the fixture should be 0.25% or less.


  • Does boiling water remove lead?

You may have heard that boiling water removes all impurities, but that is as far as germs are concerned. It does not apply to elements such as lead and iron.

When you boil water, some part of it may evaporate, leaving a lesser amount of water. As a result, the lead concentration may increase instead of decreasing. Therefore, if your water has lead, boiling does not make it fit for drinking.

  • Do Brita filters remove lead?

Are you wondering do Brita filters remove lead? Brita water filters contain coconut-based carbon filters that effectively remove impurities from water. One such example is the Brita longlast filter. It is engineered with absorbents in its filter media that help remove 99% of lead from water.

That is not all. The Brita filter lead removal system also extracts other contaminants such as Benzene, Chlorine, Ibuprofen, Asbestos, and Bisphenol-A.

  • Can filtering help to remove lead from water?

Activated carbon filters are the most effective options to remove lead from water. The adsorbent in these filters trap contaminants such as lead, chlorine, and other impurities, providing lead-free drinking water.

  • What are the various types of water filters for lead removal?

Depending upon the purpose, you can find multiple types of water filters that remove lead. You may want a lead water filter to mount on your faucet, such as the Brita Faucet System. Alternatively, you may opt for a filter pitcher. Here are a few different types of filters.

  • Faucet mount water filter for lead
  • Reverse osmosis drinking water filter system
  • Whole house lead removal system
  • Countertop drinking water filter
  • Undersink water filter system
  • Water filter pitcher
Is Your Drinking Water Safe – The Best Way To Remove Lead From Water
Article Name
Is Your Drinking Water Safe – The Best Way To Remove Lead From Water
The presence of lead in your drinking water may affect your health. Read on to know its harmful impacts, along with how to remove lead from water.
Publisher Name
Publisher Logo

Leave a Reply

Your email address will not be published. Required fields are marked *